Focused on the construction of epoxy floor paint, the experience of construction staff and real-time after-sales service, painting has always been committed to building enterprise customers more trustworthy floor conduct, we have more than 10 years of construction experience for customers tailor-made more appropriate floor plan, fully allowing customers to worry about the specific construction steps of epoxy floor paint ring! ____________ Oxygen floor paint construction method of the full hall Epoxy floor paint methods are mainly divided into primer, midway, batch, topcoat and maintenance. 1、底涂.将混凝土基材办理完结并处理清洁后就可实行底涂(辊涂或刷涂),辊涂或刷涂应均匀,厚薄一概.该底涂具备必需的透水汽功用,能加强基材强度并增补涂层对基材的附着力.
Bottom coating. After finishing and cleaning the concrete base material, the bottom coating (roller coating or brushing coating) can be applied. The roller coating or brushing coating should be uniform and uniform in thickness. The bottom coating has the necessary water vapor permeability function, which can strengthen the strength of the base material and increase the adhesion of the coating to the base material.
2. Intermediate coating. Water-borne epoxy mud is prepared by adding quartz sand and quartz powder into the prepared epoxy coating (intermediate coating). The mud is evenly coated with a trowel knife to supplement the thickness and compressive strength of the coating.
3. Batch repairing. Sand paper is used to polish the floor after middle coating, and putty made of epoxy paint (middle coating) and quartz powder is constructed several times according to the actual needs. The condition is flat and without holes, and no batch knife prints and sanding prints shall prevail.
4. Surface coating. Two rolls of epoxy floor coating are applied. After completion, the floor is smooth, gentle, clean, uniform in color and no empty drum.
5. Maintenance. Surface dry demand 24H, in this period should be closed, than the effect of non-sensitization oral cleanliness and smoothness. 3-D can be used only after the completion of conditioning 7 Ping Ming can be officially poured into use (25 C is the standard, low temperature need to be controlled and extended)